DIY Burlap Frame for Under $4

wpid-20150326_102440.jpgY’all (you like that southern slang eh?), anyways, y’all, it is spring! I have been enjoying getting the house decor changed in celebration of spring and summer. Out with winter and in with spring! All the changing over in decor would be the reason for my 2 week absence, but I am back with some budget friendly ideas for getting your own home decor into the spring spirit.

Whenever changing decor up I always like to start with the mantle and let the rest of the room take its cues from there. For this spring I wanted to really brighten up the mantle by adding in some metallics along with soft pinks and peaches. I also wanted to add some rustic elements into the whimsy color pallette to ground it a bit with the rest of the neutrals in the room. To do that I added in some rough wood, burlap, and jute elements. From the need to add in these rustic elements came my super easy and cheap burlap frame and today I want to share that DIY burlap frame with you!

You will need:

1 yard of burlap (or less depending on the size of your frame)

1 foam board (dollar tree has them)

Glue gun

Bread knife

Scissors

To make it you need to:

1. First, take the picture you want to frame and lay it centered on the foam board as pictured below. My picture was a print out from staples that cost me $4. If you haven’t heard about these prints available at Staples then check out this blog post to get all the information.

2. After you have your picture centered on the foam board, you want to trace the border of the picture onto the foam board as pictured below.

wpid-20150326_110155.jpg3. This line you just traced will be the line you use to create your frame size. Measure on inch below the line all the way around and one inch above the line all the way around and viola, you have a 2 inch thick frame shape to cut out as pictured below. (Note: The picture below wasn’t measured exactly. I went back, measured, and adjusted lines needing it)

wpid-20150326_110326.jpg4. Cut out your frame shape. I like to use a bread knife to do this. Gently cut. You don’t want to bend your frame.

5. Lay out your burlap. Take your cut foam board and lay it on top of your burlap. Then cut approximately 2 inches above and below the frame shape all the way around so it looks similar to the picture below.

wpid-20150324_144504.jpg6. Cut a slit in every corner like the picture below.

wpid-20150324_144552.jpg7. Then begin gluing your burlap to the back of your frame like the pictures below.

wpid-20150324_145330.jpgwpid-20150324_145407.jpg8. Fold your corners like you are gift wrapping and add a dab of glue to hold the corners in place. You want sharp corners.

9. Finally, tape or glue your picture to the back of the frame and voila, you are done.

wpid-20150326_102456.jpgI added my picture and frame to my mantle to give it a bit of a rustic feel without being too rustic. What do you think? What pictures are you re-framing this season? Don’t forget to check back soon for more DIY ideas…on a budget of course. And, as always, if you enjoy what you are reading then feel free to follow my blog to get all my latest decorating and money-saving ideas and tips.

Advertisements
Tagged , , , , ,

One thought on “DIY Burlap Frame for Under $4

  1. […] Some of the textural ideas I had I already blogged about, like my $2 DIY jute bowl or my easy burlap frame. Once I got some texture into the room I turned my eye towards pops of […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: